Concept study: side glazing next to the entrance
A fixed glass panel beside the door system, outside the door opening. Used where a central panel does not exist or is too narrow.
We do not yet have a dedicated visualization for this configuration. We do not reuse another study's visual so as not to suggest a realized installation.
The visualizations on this page are concept studies. They are not photos of completed installations.
Suitability
Why this configuration works.
- Placement completely outside the door system, without coordination with the door drive
- A larger continuous glass surface allows a bigger format than a narrow central panel
- Greater viewing distance when arriving from the car park or pavement
- Installation and service take place away from the main visitor walkway
Constraints
Constraints and what needs to be verified.
- Visibility from inside is usually much lower than with a central panel
- The surface may be obscured by columns, a canopy or outdoor furniture
- Direct sunlight on the façade affects legibility and brightness requirements
- It must not be the glazing of an emergency exit that has to remain clear
Study parameters
Configuration details.
- Configuration
- Fixed side glazing next to an automatic entrance
- Entrance type
- Side entrance
- Country
- Czechia
- Status
- CONCEPT STUDY
- Orientation
- Vertical, approximately 9:16
- Visibility
- Mainly from outside
- Technology
- PlaceAura Glass – transparent LED layer
Next step
Do you have a similar entrance?
Send a short description; you may attach a photo of the glazing. We will assess whether the configuration is feasible.
More studies
Other configurations.
- CONCEPT STUDY
Fixed glazing between two automatic doors
Fixed glazing between two automatic entrances is the natural centre of visitor flow while keeping the entrance open.
View study - CONCEPT STUDY
Glazed surface in the entrance vestibule
A vestibule offers stable lighting conditions and repeated contact as visitors arrive and leave.
View study